Monday, May 1, 2023

Robotics Session-Day 2

This is what the students have learnt on day 3 of the camp and day 2 of robotics session 

Some symbols:



TYPES OF CIRCUITS:



 




Advantages of parallel combination over series combination are: (i) In parallel combination each appliance gets the full voltage. (ii) If one appliance is switched on, others are not affected.

Disadvantages of series circuits: (i)An open in any one device will also interrupt current flow to all remaining devices.(ii)A short in one device will cause an increase in current through all the devices.(iii)Changing the resistance value of one device will change the current, voltage, and power values of all remaining devices.

RGB is an LED chip that has the color red, green and blue; 3 colours in 1 chip. Using these, you can create a million different colours.

RGB LED controllers work on a much simpler principal. They change the power on each of the three channels (red, green and blue) to produce a specific colour mix. To create purple colour, for instance, the red and blue channels would be wound up, and the green channel should turn off completely.

There are four terminals in RGB,1 cathode(negative) and rest 3 anode(positive).

Resistors can be used to change or control power supply.

Breadboard

A breadboard is a simple device designed to let you create circuits without the need for soldering.

Many electronic devices is used to connect and positive terminate of battery is connected to positive terminal of breadboard and negative to negative.

 

ARDUINO UNO

                          


ADRUINO HAS COMPONENTS LIKE:

·       DIGITAL PINS-WHERE POSITIVE TERMINALS OF ELECTRONIC DEVICES ARE CONNECTED.(0-13)

·       GROUND PINS-WHERE NEGATIVE TERMINALS OF ELECTRONIC DEVICES ARE CONNECTED.

·       POWER PINS- TO SUPPLY POWER

*ARDUINO UNO CAN ONLY HOLD MAXIMUM OF 5V POWER SUPPLY

·       ANALOG PINS- TO INSERT SENSORS LIKE SOIL MOISTURE SENSOR, PIR SENSOR,TEMPERATURE SENSOR,SMOKE SENSOR,ETC

          PROGRAMMING WITH ARDUINO

A software can be used to visualise or practice like Tinkercad

·       CLICK ON OPTION CODE AFTER PERFORMING A CIRCUIT.

·       THE FORMAT OF PROGRAMMING CAN BE CHANGED IN THE EDIT MODE BY BLOCKS OR TEXT.

·       IN THE OPTION OUTPUT, ENTER THE DIGITAL PIN NUMBER WHERE THE ELECTRONIC DEVICE TERMINALS ARE INSERTED.

·       WE CAN SET TIME INTERVAL OR THE ORDER EHERE ELECTRONIC APPLIANCES WILL BE ON OR WORKING.

·       MAINLY THIS PROGRAMMING IS USED FOR LED LIGHTS. 

PRACTICALLY CIRCUITS CAN BE PERFORMED WITH MOTOR,BATTERY,WIRESBREADBOARD,SENSORS ,ETC.

Sunday, April 30, 2023

ROBOTICS SESSION DAY 1-25-04-2023

  REPORT on the robotics session conducted on 25/4/23.

 By team 2 : Ibbani A,Janyashree,Harshil B,Jayaditya.

On the first day of the science summer camp, it was informed to us that we were going to have a robotics session the next day . We were very thrilled and excited to attend the session as it was the first time for us. The day arrived and Ah! It was such a good and a memorable experience for all of us. It was Shivaprasad sir who made it super interesting and taught us very good steps to follow for each and everyone present.

Firstly, he started us to teach from the very basics. He thought us about 3d printer, which we hadn’t even heard the name of! But after this session we are a bit of  masters at it! He started teaching the basics of 3d printer i.e., is how it works, how it is designed, what are its functions, applications, disadvantages and so on. To start with, he taught us to design a simple table and our very own dice ,yes! Its the same  dice we play snake and ladder with! That too with very easy steps, It was a very good demonstration and presentation for better understanding. And yes, we all paid maximum attention and followed his words. He told us that we could design whatever we want! How nice, amazing and a very good chance! We all together designed many things- it may be cute keychains, beautiful ornaments , amazing houses, and much more. We had a lot of fun doing this as we could design whatever we like! We would say that it was just a very good and memorable experience for each and everyone of us. It was just truly surprising that we could design and make the product we wished for!

We would like to highlight the fact that by shivaprasad sir’s teachings, anyone it may be a 5 year old or 90 years old person could learn and follow robotics. It was he who introduced to us a very new subject called robotics and made it even more interesting . We conclude that robotics is a very good subject and each and everyone should know the basics of that. It is going to be the new trend in future generations . Who knows robotics may be the only subject that students, children may learn and experience in the future.

It was our immense pleasure to write an article on robotics. This session will always be remembered from the bottom of our hearts.


52nd Summer School in Science - Inauguration on 24-4-2023

After the pandemic, we have resumed the conduction of Bangalore Science Forum Summer school from 2023. It began with admission of a whopping number of 40 students. 5 students joined in the subsequent days.

The 52nd Summer School in Science was inaugurated by Y.K.Jayaramappa, Director BASE and presided by Dr. H.N.Subrahmanya President, NES of Karnataka in the presence of  Shri.Y.G.Madhusudan, Vice President, NES of Karnataka, Shri.V.Venkatashiva Reddy, Hon.Secretary, NES of Karnataka, Shri.B.S. Arun Kumar, Hon.Secretary, NES of Karnataka, Shri.Tallam.R.Dwarakanath, Hon.Treasurer, NES of Karnataka, Shri. Sudhakar Esturi, Chairman, The National College, Basavanagudi,  Dr.Y.C.Kamala, Principal, The National College, Basavanagudi, Prof.Ramesh P.L, College Council Secretary, The NationalCollege, Basavanagudi .

The inauguration was followed by lecture on "World of Electronics" by P.Prabhavathi, Professor in Electronics and Communication, BNMIT, Bangalore. The students were split into groups of 4 and asked to submit report on the activities of the day.  This is the report of Day 1.

TEAM NAME: GROUP 1

TEAM MEMBERS: Amogha H.S - national high school Basavanagudi, Chetna Kiran Kumar - Siddaganga public school, Dhulika K S - Vidyaniketan Public School, Akshay Simha.N.P-The New Cambridge English School

REPORT   

We were privileged to attend the inauguration of the 52nd Bangalore Science forum. The inauguration was facilitated by four honourable guests. The guests came up and encouraged us and shared a lot of knowledge in the field of science. Their thoughts were very inspiring, and gave us a boost to look forward to this great initiative. They also interacted with us and gave us a lot of positivity and motivated us to actively be part and make the program successful.

After this event there was a interesting session by prabhavathi ma’am about VLSI technology, we heard Kamala ma’am saying that prabhavathi ma’am is a wonderful, courageous, hard working woman . She gave an idea about An integrated circuit or monolithic integrated circuit,which  is a set of electronic circuits on one small flat piece of semiconductor material, usually silicon.Large numbers of miniaturised transistors and other electronic components are integrated together on the chip. This results in circuits that are orders of magnitude smaller, faster, and less expensive than those constructed of discrete components, allowing a large transistor count.

At the end, we were given instructions for the camp. First we were told of the timings and all the things that will be done in the camp. Then we were told of all upcoming guests and a few institutions we were visiting in the later days. Then we were told that we should not inform any one of the co-ordinators whenever we take a leave or go in the middle of the camp. It was also said that we should ask more questions to the teachers and write down everything they would say.

Thank you 






















 


Friday, May 5, 2017

Day 11. Talk on Biometrics by Dr.Y.C.Kamala

The 11th day of ‘Bangalore Science Forum’ that is on the 5th of may 2017.. The talk of the day was given by DR.Y.C.kamala, an eminent Science resource person, she is the director of Annual Summer School in Science and also a faculty of the physics department of  National College Basavanagudi. She  widened our  knowledge horizon with a talk on BIOMETRICS. As all of us know  A journey of thousand miles begins with a single step. She took us step by step through the journey of BIOMETRICS ,beginning from the first step that is the definition of BIOMETRICS that “it is the automated use of behavioral and physiological characteristics to determine and verify an identity.” 
She took us through the wonderful evolution of BIOMETRICS. Right from the stage of signatures and fingerprints to the modern era of machineries, that is the machineries used in Aadhar Card works on the principles of BIOMETRICS ,she outlined BIOMETRICS as BIO meaning LIFE and METRICS  meaning MEASUREMENTS. She also described the need of Biometrics and the important role it Plays in the companies, Aadhar Offices etc. she sketched the need of BIOMETRIC AUTHENTICATION and glimpsed the FRAUDS IN THE INDUSTRY such as the frauds happening during the money transactions in ATMs  etc. she gave us a gist of the necessity of BIOMETRIC APPLICATION, its role in preventing the stealing of possessions that mark Authorized persons. 
She then distinguished between  IDENTIFICATION and AUTHENTICATION. That IDENTIFICATION determines the identity of a person whereas AUTHENTICATION determines whether the person is indeed the same person. And presented us the types of biometrics like Fingerprints, Face Recognitions, hand geometry, iris scan, voice scan, signatures, retina scan, odour, D.N.A etc. she gave us the types of fingerprints such as Arch, Loop,Whoorl. She acknowledged the desired properties such as UNIVERSALITY, COLLECTABILITY, UNIQUENESS, PERFORMANCE, USER’S ACCEPTABILITY etc she specified information concerning to MULTIMODEL BIOMETRICS and the PATTERN RECOGNITION CONCEPT she also described about  FAR-false acceptance rate and FAR-false acceptance rate. SO TOTALLY IT WAS A VERY INTERESTING AND A VERY INFORMATIVE TALK. 

Wednesday, May 3, 2017

Day 9: Visit to MAIYAS food products factory.


Visit to Maiyas food factory - Report by Surabhi Shastry

May 3rd, the ninth day of our exciting journey with the Bangalore Science Forum was yet another enlightening day for all of us.  We visited the Maiyas food factory located on Kanakapura Road. It was indeed an enriching opportunity because it is not everyday that we get a glimpse of the behind the scenes view of the hardwork that is put into serving traditional food at its purest and most sumptuous form.
Maiyas is a family business that runs on pure passion for good food. It is the vision of Dr. P. Sadananda Maiya, a pioneer in the Indian food industry.

The day began with excitement and enthusiasm. We reported at the factory at 9:30. Parents, who also were keen to explore the factory had accompanied their kids. We were given warm greetings by the senior employees of the factory who were there to give us a complete tour of the factory. After being divided into three groups, we were given instructions on the strict rules and regulations to be followed to maintain perfect hygiene. We were given masks, covers for our head and footwear to prevent our hair, bacteria and dust from contaminating the food.
The factory is ISO certified and therefore their production process is highly clean and sophisticated. Their excellent food products create demand from all over the world and therefore they export them to all corners of the world including USA, Japan, Australia, Singapore to name a few.
The range of products include beverages, frozen food, sweets, savouries, masalas, pickles, ready to eat and instant mixes.We were first taken to the savoury food production area. As we walked through  the corridor we could smell the sharp, spicy aroma of rich blended spices that tingled our olfactory senses. Our guide showed us the massive fryers which made our beloved crunchy everyday snacks like murukku, kodubale and bhakarwadi. The machines carried out all processes- from shaping the dough to evenly placing them on the conveyor belt, to frying them and cooling them. They fried it at the perfect temperature to let the oil seep through and crisp up the snack just right. In addition to using cholesterol-free oil to prepare products, their innovative technology extracts at least 30 per cent of the oil from the final product making it a healthier option
The spices were stored in a lower floor and were brought up through a vacuum geyser. Depending on whether the mixture had to be pure or blended, required amounts of ingredients were extracted and transported to a storage machine. These spices were then passed through a pin mill which made the mixture coarse. The resulting mixture was then passed through a roller mill to make it fine. The powder was ground according to the food it would be incorporated in. The powder was then thoroughly mixed and later taken for packaging. The special thing about the production was that they made it in such a way that moisture was completely evaporated from the spices so as to preserve them for a longer period of time.Maiyas asserts that one must know the exact proportion, quality and purity of each ingredient, and adjust these proportions accordingly so as to ensure consistent quality. Even the preparation of the ingredients makes a difference.The vibrant hue and the whiff of these spices was a treat.
Packaging involved two types of machines. One, the FFS(form fill seal) machine which filled food into a roll of packing material and then was sealed at intervals to make a series of adjoining packets. The other one was the PSF(Pouch Fill Seal) machine. Individual packets were opened, filled and sealed by this machine. It was a very knowledgeable experience to watch how our everyday snacks packets were made. A very distinct observation we made was that the hygiene was maintained every step of the way. It assured us of the safety of the food that we eat. Food is truly made with love in this food haven.
The instant food division consisted of 1 minute express rasam powder blocks which came in three flavours. All you needed  to do was put it in boiling water and it would turn into the tasty rasam we all love. The bhel bars and fruit bars were also manufactured there. All these were made in such a way that they could be preserved for a long time.
The sweets manufactured include soan-papdi and jamun, two mouth-watering sweets made from the best of the best ingredients that Maiyas handpicked for these delicacies loved by all. Soan papdi is made from two core ingredients- sugar candy and gram flour mixture. They are vigorously stretched until fine threads arise. Jamun is made from scratch and canned.
Milk beverages are also made here using purified, lab tested and approved milk. They are canned and placed in retorts. This heats them to kill all the harmful microbes. The specific processes are heating, preheating, cooling and killing.
Frozen foods are the most exported. They have all kinds of traditional, Indian, homely food which are packed in such a way that they can last for upto two years. The food is passed through spiral freezers which can go down to a temperature of -35 degree Celsius. The frozen food is then stored in a storage unit with a very low temperature.
The main warehouse was completely packed with crates of packed food ready to be shipped.
We were then taken to the laboratory which was also where all the research and development took place. This was the place where every single raw material and product was tested for regulative values. If the product did not meet all the requirements, the product was either held or rejected and discarded. Intensive research goes in to making the product so that it reaches us fresh every time, with the aid of world-class technology.
Next, we were escorted to much awaited part of the day- lunch  at the one and only Maiyas factory. Food for the employees was served everyday and on this day, we were given the privilege of tasting original Maiyas freshly prepared food. Food was traditional, sumptuous, fragrant and wholesome.
All in all this was an eye opener to the world of food production where they use technology optimally at every juncture of food production to bring alive the authentic traditional taste, with faster turnarounds.

Tuesday, May 2, 2017

Day 8:Visit to IIIT-B

Report  by group-8

MEMBERS OF THE GROUP –AISHWARYA B.G,SHREYA,SWATHI,DEEKSHA,SNEHA

In Sanskrit , a saying goes......
“vidhyarthinah tyajeth sukham .
Sukharthinah tyajeth vidhyam.”

This means the ones who want to gain knowledge have to leave aside all the pleasures and the ones who want to indulge in worldly pleasures would never gain knowledge.
The visit to IIIT-B (International Institute of Information Technology) was really eye opening and exciting.We gathered at IIIT-b with lots of curiosity .A group photo was taken and then we were led to the seminar hall by the volunteers from IIIT.
The program was anchored by Prof.Dinesh. Dr. S.Sadagopan, the director of the institute addressed us. He gave interesting anecdotes and enlightened us about India's position in the IT field.He said IT is India's Tomorrow. This really motivated us towards IT field. Then there was a very informative talk about IM.Tech course by Prof. Madhava Rao. Then there was a very informative talk on electronics by Prof.Chethan. 

After tea, the sessions continued. We had a very exciting and enthralling talk by Prof.Sujith Chakraborti about the difficulties of software development. The last and most educative talk was by Prof.Amit prakash about IT and society.We also saw some vedios on IIIT-B and  about how IIIT students have made robots and other scientific models.Another   interesting video was   “A day made of glass” which showcased how our near future would be with the help of information technology.  After the seminar we had lunch.

Soon after the lunch we were shown some interesting robots ,like the one which could detect  the black line and move accordingly ,and we were also shown another robot which could clean the house and it had a peculiar feature that when it bumps into any obstacle then it changes its direction .       After than we were shown 3D printing in which the plastic was used up to a 3D object, and its motto was “ you design, we create “.They had made many such   3D objects like Eiffel tower, the layers of earth , a man ,and many others.     After that again a group photo was taken .We all learnt of how vast IT is and how we can explore it. We being  India’s tomorrow have to realize this.


Monday, May 1, 2017

Day 7: Visit to NIMHANS

Day 7 : 1st May , 2017

       Today we all were eagerly waiting to explore the NIMHANS Brain Museum . It was held in 2 sessions namely girls session ( from 9:30 AM to 12:30 PM ) and boys session ( from 2:00 PM to 4:00 PM ). Everyone were quite interested to know about our Brain.
        The session was headed by Dr.Anitha Mahadevan and Team Prof.Department of Neuropathy , NIMHANS , Banglore.
         The class started with a small introduction about evolution of human brain . Then we got to see the specimens' of brains' of cow, hen, snake, owl, partot, etc. It was quite suprising to see the brain of the foetus!
         
 Dr.Anitha explained the complexity in the structure of the brain among different animals . Then there was a brief discussion about human brain and its parts .The discussion continued regarding the functions of each part of the brain . We were surprised to know that each and every part of the brain has a specific function !

 Then came the terrible topic -  'The Brain Diseases'. There are absolutely many number of diseases from which a man can suffer from . Some of the diseases like Meningitis , Mucornycosis are caused by fungi . Viruses cause a disease called Encephalitis . Some diseases are genetically acquired too. We could see the specimens' of these brain disorders in museum .
          There had always been a talk that the government hospitals usually go for CT Scan over MRI because it is cheap . It is actually not true .CT Scan combines a series of X-Ray images taken from different angles whereas the MRI shows abnormal tissue clearly . So ,it is not the cost ,it is actually the diordet which decides which test is to be done.
            You do hav to bilieve me now.In the next session we got to touch the brain, kidneys, heart and interstine...! It was a lifetime opportunity . Mam then explained more about the brain by showing the neurons in the brain.
             Overall it was a complete knowledgeable and funfilled day.
              *THANKS TO SCIENCE SUMMER SCHOOL*


-By Kavitha MS
       (Group 7 , BSF Summer School ,2017)